Description
Original AntMiner APW3++ PSU 1600W Power Supply for Antminer D3 S9 / L3 In Stock 100V-240V Mining
Package includes:
1 x APW3 power supply for Antminer S9 L3
Features:
1. The APW3++ can deliver a maximum power of only 1200W if it is connected to a 110V mains power supply. To obtain the rated power of 1600W, the APW3++ must be connected to a 220-240V mains power supply. Please check the mains power supply that is the standard in your region before ordering.
2. This batch of PSU comes with only 10 PCIe connectors so cannot be used with more than one Antminer L3+ miner.
Specifications
|
Output
|
DC Voltage
|
12.15V
|
|
Rated Current
(220V input)
|
133A
|
|
Rated Current
(110V input)
|
100A
|
|
Rated Power
(220V input)
|
1600W
|
|
Rated Power
(110V input)
|
1200W
|
|
Ripple & Noise
|
<1%
|
|
Voltage Regulation
|
<2%
|
|
Source Regulation
|
<1%
|
|
Load Regulation
|
<1%
|
|
Setup, Rise Time
|
<2S
|
|
Power off Protection Trip Time
|
>9mS
|
| Interface Type |
5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors) |
|
Noise Level
|
<43DB
|
|
Input
|
Voltage Range
|
100-240V AC
|
|
Starting Voltage
|
95-105V AC
|
|
Frequency Range
|
47-63Hz
|
|
Power Factor
|
>0.95 (full load)
|
|
Leakage Current
|
<1.5mA (220V 50Hz)
|
|
Protection
|
Low-voltage Input
|
80-89V AC
|
|
Output Short Circuit
|
Yes
|
|
Output Overcurrent
|
134-185A max.
|
|
Overheat Protection
|
Yes
|
|
Environment Conditions
|
Operating Temperature
|
-20°C – 50°C
|
|
Operating Humidity
|
20% – 90% relative humidity (non-condensing)
|
|
Structure
|
Dimensions
|
220mm*108mm*62mm
|
|
Cooling
|
Fan
|
Forced-air cooling
|
Efficiency Test Curve
Load versus temperature derating curve
Reviews
There are no reviews yet.